Fretboard model

Post date: Jun 27, 2014 5:25:24 PM

I finally got a Solidworks model together of the fretboard so I could start getting ready for CNC milling. It's more complex than I thought since there are various heights that have to be observed, especially where the fretboard transitions from the neck to the body of the ukulele. I've allowed minimal slop since I'm assuming that some had tweaking of the wood or PCB will be required. The main thing is to try to keep things as level as possible to I don't have major issues with installing and leveling the frets. I've also put a 3d pdf over in the library that may give a better idea of what's going on. By the way, the wings on the side get milled off at the end.